20 YEARS OF SMART WEIGHING
Home
Region selection
AUS (English)
EUR (English | Deutsch)
US (English)

News archive

155 total News items. Showing 10 items per page.
1
divider
T Series weight transmitters

T Series weight transmitters

Release date: 05 Jul 17

The T Series weight transmitters have been used by OEM customers for many years in various customised versions. We now have available a product page with datasheet and reference manual for a standard version. The T series units allow for network addressing up to 31 units to support ring networking. Measurement chain and application firmware is identical to the R320 instrument so nothing new to learn for field technicians to setup and calibrate.

Two versions are available: 

T620: the IP68 waterproof T620 with M12 connectors

T610: for DIN rail applications using RJ45 patch cabling.

Both use the same interface as the R320, so you can use the View300 to set up the units. Alternatively ask us about a special R320 that can be used as a handheld configuration tool for the T-series.

Please call the sales engineer in your region to discuss your application.

Release : T000-600 rev 2.00 T-Series Modules Reference Manual.

Release : T000-602 rev 1.00 T-Series Modules Data Sheet.

Product Page

divider
Rinstrum C500 Series Launch – Introductory May Offer

Rinstrum C500 Series Launch – Introductory May Offer

Release date: 04 May 17

It is with great pleasure that we introduce the C500 industrial controller range. Equipped with modern interfaces, increased accuracy and user programmability, it is the culmination of our 25 years of industrial weight indicator design experience.

C520: Panel mount version with a 14 segment LED display, giving great readability.
C530: DIN rail mounted with no display.

Like the R400 Series, there are accessory modules for communications, eight I/O and analog output that includes two convenient onboard I/O for monitoring low level and high level alarms. All accessory modules are electrically isolated and the AC power module includes 12VDC out.

User Programmability is standard through built in embedded Lua scripting. This builds on our experience over the past 4 years with application development using Lua programmability on our R400 Series. Robust libraries and an extensive list of example applications give you maximum flexibility to meet your customer application requirements in an economical product series.

During May 2017 we are running an introductory offer so you can get your sales and technical staff their demo units. When you make your purchase you can book in with one of our support crew for your 30 min introductory training session. Call your local Rinstrum sales office today to discuss applications for the new C500 series.

Product page

divider
Rinstrum C500 Series Launch – Introductory May Offer

Rinstrum C500 Series Launch – Introductory May Offer

Release date: 04 May 17

It is with great pleasure that we introduce the C500 industrial controller range. Equipped with modern interfaces, increased accuracy and user programmability, it is the culmination of our 25 years of industrial weight indicator design experience.

C520: Panel mount version with a 14 segment LED display, giving great readability.

C530: DIN rail mounted with no display.

Like the R400 Series, there are accessory modules for communications, eight I/O and analog output that includes two convenient onboard I/O for monitoring low level and high level alarms. All accessory modules are electrically isolated and the AC power module includes 12VDC out.

User Programmability is standard through built in embedded Lua scripting. This builds on our experience over the past 4 years with application development using Lua programmability on our R400 Series. Robust libraries and an extensive list of example applications give you maximum flexibility to meet your customer application requirements in an economical product series.

During May 2017 we are running an introductory offer so you can get your sales and technical staff their demo units. When you make your purchase you can book in with one of our support crew for your 30 min introductory training session. Call your local Rinstrum sales office today to discuss applications for the new C500 series.

Product Page

divider
Updated Data Sheets for R400 Series

Updated Data Sheets for R400 Series

Release date: 21 Apr 17

 Note to all Dealers and Distributors, the data sheets for the R400 Series have been updated. They are available in the Download section of the various product pages or in the All Download section. The full series of data sheets for the all of the firmware is available as a single document for convenience.

Please contact our sales teams directly if you require further support or have any questions.


Data Sheet
Product Page

 

divider
 

Updated Firmware - R400 Series K401 v2.65 and K402 v2.65

Release date: 02 Mar 17

The K401 and K402 R400 Series firmware has been updated with minor bug fixes relating to use with Lua module and the analogue module calibration. Firmware is available for download on the product pages or in the download section. Any questions please email us or contact one of our sales engineers directly.

K401 Product Page

K402 Product Page
 

R400 Series Calibration Product Details »

Download document

divider
 

Updated Firmware - R400 Series K401 v2.65 and K402 v2.65

Release date: 02 Mar 17

The K401 and K402 R400 Series firmware has been updated with minor bug fixes relating to use with Lua module and the analogue module calibration. Firmware is available for download on the product pages or in the download section. Any questions please email us or contact one of our sales engineers directly.

K401 Product Page

K402 Product Page
 

R400 Series Calibration Product Details »

Download document

divider
 

Updated Firmware - R400 Series K401 v2.65 and K402 v2.65

Release date: 02 Mar 17

The K401 and K402 R400 Series firmware has been updated with minor bug fixes relating to use with Lua module and the analogue module calibration. Firmware is available for download on the product pages or in the download section. Any questions please email us or contact one of our sales engineers directly.

K401 Product Page

K402 Product Page
 

R400 Series Calibration Product Details »

Download document

divider
Stock Code Part Number update to LED large digit remote displays

Stock Code Part Number update to LED large digit remote displays

Release date: 13 Feb 17

With the release of the new price catalogue we have had a change of part numbers for the Large High Visibility Remote Displays. There is no change to the specifications just the stock code part number change. The D730 is now a D732, a D840 is now a D841. There is the addition of a new D850 and the D820 has been removed. Please note that existing stock will still have the old stock code part numbers on the packaging and on labels, marketing materials and website until these are changed to the new numbers. This stock code part number change was done to fix mismatches in our global part numbering and include the software version in the part number, standardising these with the Rinstrum indicator part number format. If you have any questions regarding LED large digit remote displays please contact our sales team.

divider
SOLAS- Verified Gross Mass (VGM) Update 2017

SOLAS- Verified Gross Mass (VGM) Update 2017

Release date: 11 Jan 17

What is this "SOLAS" regulation?
Declaring your container’s gross mass has always been a requirement under the shipping regulations. However, with more frequent accidents occurring and delays due to miss-declared weight, it has become a priority to ensure these weights are verified before loading the containers onto a vessel.
SOLAS regulation states the approval of two methods in verifying the gross mass of packed containers and both these methods must be done with calibrated and certified equipment.
Method 1: Weighing the container after it has been packed
Method 2: Weighing all the cargo and contents of the container and adding those weights to the container’s tare weight.
No estimated weight is permitted and the weighing equipment must meet national certification and calibration standards.

Read full article download pdf

conwEIGHr product page

 


 

Download document

divider
Welcome Bjorn Viljoen to our Rinstrum team

Welcome Bjorn Viljoen to our Rinstrum team

Release date: 09 Jan 17

We would like to welcome Bjorn Viljoen to our Rinstrum team in 2017 as our heavy capacity weighing specialist. His initial focus will be on helping customers develop the best solution for container weighing for shipping.

Looking after the conWEIGHr and axleWEIGHr products is fitting for his passion in innovation and quality engineered products. Bjorn has a wealth of knowledge in the industrial, manufacturing, logistics and supply chain environment with more than 19 years of successful experience implementing valued solutions for customers.

Bjorn is based in our Brisbane office. He moved to Australia from South Africa. He studied a Bachelors in Commerce.

conWEIGHr mobile container weighing


 

divider
 
1

 

Back to top